Honeywell 3800gPDF RS-232 Kit Blanco User's Guide Page 18
- Page / 156
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
1 - 2
Connecting the Imager with USB
Note: Honeywell recommends connecting the imager end of the cable first and
the host end second.
An imager can be connected to the USB port of a computer.
1. Connect the appropriate interface cable to the imager and to the computer.
2. The imager beeps.
3. Verify the imager operation by scanning a bar code from the Sample
Symbols in the back of this manual.
For additional USB programming and technical information, refer to the Honey-
well “USB Application Note,” available at www.honeywell.com/aidc.
USB PC or Macintosh Keyboard
The 3800g imagers are factory programmed for a USB interface. If this is your
interface and you do not need to modify the settings, skip to Chapter 3.
If you programmed the imager for a different terminal interface and you want to
change to a USB Keyboard (PC) or USB Keyboard (Mac), scan one of the fol-
lowing codes to program the 3800g. Scanning these codes adds a CR and
selects the terminal ID (USB PC Keyboard - 124, USB Macintosh Keyboard -
125).
USB Keyboard (PC)
USB Keyboard (Mac)
- 3800g/3800gHD/3800gPDF 1
- Disclaimer 2
- Table of Contents 3
- Chapter 4 - Data Editing 4
- Chapter 5 - Data Formatting 5
- Chapter 7 - Symbologies 5
- Chapter 8 - Interface Keys 8
- Chapter 9 - Utilities 8
- Chapter 10 - Visual Xpress 8
- Chapter 13 - Maintenance 9
- Product Agency Compliance 11
- Industry Canada ICES-003 12
- Information 12
- Australia/NZ 13
- South Korea 13
- International 14
- Light Source 15
- Getting Started 17
- USB PC or Macintosh Keyboard 18
- ). The 19
- Plug and Play 20
- (Keyboard Wedge) 20
- Keyboard Wedge Connection 21
- Laptop Direct Connect 22
- Reading Techniques 24
- Terminal Interfaces 27
- Supported Terminals 28
- * Factory default setting 29
- Keyboard Country 30
- Keyboard Style 31
- Keyboard Modifiers 32
- Numeric Keypad Mode: 33
- Default = Off 33
- RS-232 Baud Rate 34
- Default = None 35
- RS-232 Handshaking 36
- Good Read Indicators 37
- Beeper Duration – Good Read 38
- LED – Good Read 38
- Number of Beeps – Good Read 38
- Good Read Delay 39
- Trigger Modes 39
- Hands Free Time-Out 40
- Reread Delay 41
- Centering Window 41
- Output Sequence Overview 44
- Output Sequence Editor 45
- Require Output Sequence 45
- Output Sequence Example 46
- Multiple Symbols 48
- Video Reverse 49
- Data Editing 51
- Scanned Data 51
- Prefix Selections 53
- Suffix Selections 54
- Function Code Transmit 54
- Prefix Scanned Data Suffix 55
- 1 2345STX HT CR LF 56
- Data Formatting 57
- Other Programming Selections 58
- Data Format Editor Commands 58
- Send Commands 58
- Move Commands 59
- Search Commands 59
- Miscellaneous Commands 59
- Data Format Editor 60
- Data Formatter 61
- Alternate Data Formats 61
- Secondary Interface 63
- Secondary Trigger Mode 64
- Default = 65
- 5,000 ms 65
- Symbologies 67
- Message Length 68
- All Symbologies 68
- Codabar Start/Stop Characters 69
- Codabar Check Character 69
- A12D D34A 70
- Character 70
- Stop Start StopStart 70
- Codabar Message Length 71
- Code 39 Start/Stop Characters 71
- Code 39 Check Character 71
- Code 39 Message Length 72
- Code 39 Append 72
- Full ASCII 73
- Interleaved 2 of 5 74
- Default = No Check Digit 75
- Code 93 Message Length 76
- Code 93 Code Page 76
- Straight 2 of 5 Industrial 77
- Straight 2 of 5 IATA 77
- Matrix 2 of 5 78
- Check Digits Required 79
- Code 128 80
- Code 128 Message Length 81
- Code 128 Code Page 81
- Telepen Output 82
- Telepen Message Length 82
- UPC A Check Digit 83
- UPC A Number System 83
- UPC A Addenda 84
- UPC A Addenda Required 84
- UPC A Addenda Separator 84
- UPC-A/EAN-13 85
- UPC E0 and UPC E1 Expand 86
- UPC E0 Check Digit 86
- EAN/JAN 13 87
- EAN/JAN 13 Check Digit 88
- EAN/JAN 13 Addenda 88
- EAN/JAN 13 Addenda Required 88
- EAN/JAN 8 89
- EAN/JAN 8 Check Digit 90
- EAN/JAN 8 Addenda 90
- EAN/JAN 8 Addenda Required 90
- EAN/JAN 8 Addenda Separator 91
- MSI Check Character 91
- Plessey Code 92
- GS1 DataBar Omnidirectional 92
- GS1 DataBar Limited 93
- GS1 DataBar Expanded 93
- China Post Code 94
- Korea Post Code 95
- PosiCode 95
- Trioptic Code 96
- Codablock F 97
- Code 16K 97
- Code 16K Message Length 98
- Code 49 Message Length 99
- PDF417 Message Length 99
- GS1 Composite Codes 100
- GS1 Emulation 101
- 3800gPDF only) 102
- Interface Keys 103
- Supported Interface Keys 105
- Utilities 109
- Visual Xpress 110
- Serial Programming Commands 113
- Query Commands 114
- Responses 114
- Examples of Query Commands 115
- Trigger Commands 116
- * Indicates default 117
- # Indicates a 117
- DLYGRD#### 120
- Prefix/Suffix Selections 121
- Product Specifications 133
- Parameter Specification 134
- Standard Cable Pinouts 135
- Maintenance 139
- Troubleshooting 140
- Customer Support 143
- Product Service and Repair 144
- Limited Warranty 145
- Appendix A 147
- Symbologies, 99) entry 148
- Sample Symbols 153
- Programming Chart 155
- Honeywell 156
Related products and manuals for Bar code readers Honeywell 3800gPDF RS-232 Kit Blanco
(188 pages)
Bar code readers Honeywell 4600g User's Guide
(248 pages)
(248 pages)
© 2020, manymanuals.com. All rights reserved. | 0.172 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals