Honeywell FocusBT 1633 User's Guide download pdf (Page 21)

ESTABLISHING COMMUNICATION VIA BLUETOOTH TECHNOLOGY

When FocusBT Acts as a Client to Other Devices with

Bluetooth Technology

In the client device mode of operation, the FocusBT initiates the connection via

Bluetooth wireless technology. The Bluetooth address of the remote device is

required to establish a connection. The remote device must also be configured

to accept incoming connections and must support the Bluetooth wireless

technology Serial Port (SPP) profile.

• If the Bluetooth address of the remote device is headed with FNC3

and consists of a 12-digit hex value (e.g.

000CA7000118), scan the

address bar code to establish the communication.

Sample of a 12-digit Bluetooth Address with FNC3

³000CA7000118

• If the Bluetooth address of the remote device is not

headed with

FNC3 but is just a common 12-digit hex value (e.g. 000CA7000118),

first scan the Get Bluetooth Address bar code then scan the remote

device’s Bluetooth address bar code.

Get Bluetooth Address

³ 000CA7FFFFFF

• If the Bluetooth address code of the remote device is set to

000CA7000000, FocusBT will automatically go into server mode and

will not attempt to establish an outgoing connection via Bluetooth

wireless technology.

To return to service mode:

Scan the bar code below to change FocusBT from client mode to

service mode.

*Provide Bluetooth Service

³000CA7000000

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

No comments

Honeywell FocusBT 1633 User's Guide Page 21