OWNER’S GUIDE® U.S. Registered TrademarkCopyright © 2003 Honeywell International Inc. All Rights Reserved 69-1396-2T4700 Chronotherm™ElectronicProgram
69-1396—2 10Table 5. Overriding a Program.Programming Additional FunctionsTo change display or function (for example, to °C or °F temperature setting,
11 69-1396—2NOTE: To exit the programming mode: 1) press and hold the Prog key for three seconds and the display returns to Run mode, or 2) during the
69-1396—2 12CheckoutAfter initial thermostat powerup (or after eight hours of continuous power loss), the display blinks for two seconds, then runs a
13 69-1396—2Customer AssistancePlease direct any questions about the operation of this thermostat to Honeywell Customer Assistance at 1-800-468-1502,
69-1396—2 14Limited One-Year WarrantyHoneywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, unde
15 69-1396—2THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTI
69-1396—2 G.H. Rev. 1-03 www.honeywell.com/yourhomePrinted in U.S.A. on recycled paper containing at least 10% post-consumer paper fibers.Automat
69-1396—2 2Features• Digital temperature sensing and control for energy efficient precision operation. • Flexibility of 5-1-1 day or 7-day programming
3 69-1396—2Welcome ... to the world of comfort and energy savings with your new Honeywell programmable thermostat.Your new T4700 Chronotherm™ Programm
69-1396—2 4SpecificationsModels:T4700A: SPST; makes heating circuit on temperature fall.T4700B: DPST; makes heating circuit on temperature fall. Break
5 69-1396—2Programming ThermostatInitial PowerupWhen the thermostat is first powered up (or after eight hours of continuous power loss), the display b
69-1396—2 6Thermostat ResetThe T4700 can be reset to its default settings (Table 1) by inserting a bent paper clip or similar wire into the small hole
7 69-1396—2 Table 2. Setting the Current Day and Time.Step Press This Key Display Shows Description1 Displays day of the week.2 Displays changed day o
69-1396—2 8NOTE: Continue through LEAVE, RETURN, and SLEEP periods using the same procedure to set the time and temperature for each period. To easily
9 69-1396—2NOTE: To exit the programming mode: 1) press and hold the Prog key for three seconds and the display returns to Run mode, or 2) during the
Comments to this Manuals