Honeywell RCWL330A User Manual download pdf (Page 16)

Installation Instructions

69-2148EFS—01 14

Troubleshooting

A “beep” sound is heard in learn mode…

• The push you are programming has already been learned by the chime.

• If you want to change the icon associated with the push, use the un-learn procedure, then

program the push again.

Two “beep” sounds are heard after the normal chime sound…

• This indicates a low battery in the bell push that activated the chime. Install a new battery,

type CR2032.

When the bell push is operated, the amber confidence light does not turn on, or is only

on for a short time…

• In normal operation, the amber light will turn on for 1 second. When the battery is weak, the

light will only turn on for a short time. Install a new battery, type CR2032.

The chime does not work…

• Check that the chime batteries are the correct type, LR14 “C” cells. Only use alkaline batteries.

• Check that the batteries are fitted correctly.

• The chime could be out of range of the bell push. Try the chime in a different location.

• The chime might not have learned the identity of the bell push. Follow the programming

procedure.

69-2148EFS_A.indd 14 3/20/2008 9:34:25 AM

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 59 60

No comments

Honeywell RCWL330A User Manual Page 16