Honeywell CT87B User Manual download pdf (Page 9)

CT87A,B,J ROUND® THERMOSTAT

9 69-0274-6

Mount the thermostat

1. Pull off the thermostat cover and discard the red plastic insert that

holds the mercury switch in place during shipping.

2. Using a pencil point, slide the heat anticipator indicator to 1.2 on the

scale as shown in Fig. 14.

IMPORTANT: This prevents the thermostat from being damaged.

3. Place the thermostat over the wallplate or subbase so that the three

captive mounting screws align with the three raised screw holes on

the wallplate/subbase.

4. Tighten the three captive mounting screws as shown in Fig. 15.

NOTE: These screws complete the installation of the

thermostat.

.15

.12

.10

1.2

HOLE SUITABLE FOR

PENCIL POINT

TO MOVE INDICATOR

HEAT ANTICIPATOR INDICATOR

SCALE

M20226

Fig. 14. Adjusting heat anticipator indicator.

CAPTIVE SCREWS (3)

M2022

Fig. 15. Tightening mounting screws.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Honeywell CT87B User Manual Page 9