Honeywell PRO TH4110D User Manual download pdf (Page 5)

PRO TH4110D Programmable Thermostat

3

Wallplate installation

Remove the wallplate from the ther-

mostat as shown at left, then follow

directions below for mounting.

1 Pull wires through wire hole.

2 Position wallplate on wall, level and

mark hole positions with pencil.

3 Drill holes at marked positions as

shown below, then tap in supplied

wall anchors.

4 Place wallplate over anchors, insert

and tighten mounting screws.

5 Insert quick reference card in slot

in front of wall plate.

Grasp top and bottom of wallplate

and pull to remove from thermostat.

Drill 3/16” holes for drywall.

Drill 7/32” holes for plaster.

Wall anchors

Mounting screwsWire hole

Insert quick reference card after

wallplate is mounted (see mounting

instructions, below)

1 2 3 4 5 6 7 8 9 10 ... 15 16

Comments to this Manuals

No comments