Honeywell PCR191W User Manual download pdf

Honeywell

(PCR191W)

3&5:+21(<:(//0$18$/(1*

6,=(:;+00

%<;++8$1*

Atomic Projection Clock

USER MANUAL

TABLE OF CONTENTS

INTRODUCTION

Thank you for selecting the Honeywell Atomic Projection Clock. This

device delivers a precise time keeping with projecting the time and

temperature onto the wall or the ceiling.

In this package you will find:

•

One Atomic Projection Clock

•

One AC adapter

•

One User Manual

Please keep this manual handy as you use your new item. It contains

practical step-by-step instructions, as well as technical specifications and

precautions you should know.

PRODUCT OVERVIEW

FEATURES

Precise time and date set via RF signals from the US Atomic

Clock

•

Calendar displaying date with month and day in English, Spanish

or French

•

12 or 24 hour time format

•

Dual crescendo time alarm with programmable snooze

•

Moon phase calendar

•

Indoor temperature

•

Temperature unit selection in Fahrenheit or Celsius

•

Projects time or temperature on ceiling or wall

•

Focus adjustment

•

Control image with 180° rotation or flip

•

LED backlight

•

AC/DC adapter included for continuous projection

SIDE/TOP VIEW

FRONT VIEW

REAR VIEW

FRONT VIEW

TEMPERATURE AND ALARM WINDOW

Displays indoor temperature and alarms

TIME WINDOW

Displays time with seconds and US map

CALENDAR WINDOW

Displays month, date, day of the week abbreviation, year and moon

phase

UP (+) button

• Increases all function parameters

• Allows toggling between 12 and 24 hour time format

• When pressed and held activates US Time Zone selection

• Enforce a time signal search when DOWN (-) buttons are

pressed and held simultaneously.

DOWN (-) button

• Decreases all function parameters

• Activates a language selection mode for the day of the week

• Enforce a time signal search when UP (+) buttons are pressed

and held simultaneously.

MODE button

• When pressed and held activates the clock programming mode

• Allows toggling between temperature and two alarm modes

G. FLIP button

•

Flips the projected image 180° degrees

•

When pressed and held activates a rotation between projected

H. SET button

•

Allows programming ALARM 1 and its snooze interval

•

Activates or deactivates ALARM 1

SET

button

• Allows programming ALARM 2 and its snooze interval

• Activates or deactivates ALARM 2

REAR VIEW

J. ROTATE knob

Allows rotating of the projected image clockwise or counterclockwise

K. BATTERY COMPARTMENTS

Accommodate 2 (two) UM-3 or AA 1.5V alkaline batteries

L. FOCUS knob

Allows adjusting the projected image sharpness

M. 2 CLOCK FEET

Support clock ina vertical position on the flat surface

SIDE/TOP VIEW

N. TIME/TEMPERATURE PROJECTOR

Projects current time or indoor temperature

LIGHT/SNOOZE button

Activates LED backlight and snooze

REAR BODY SWIVEL COMPARTMENT

Rotates to project time or temperature on the wall or ceiling

Q. AC ADAPTER INPUT

Allows connecting clock with the power outlet through the AC/DC adapter

provided

BEFORE YOU BEGIN

•

We recommend using alkaline batteries

•

Avoid using rechargeable batteries. (Rechargeable batteries

cannot maintain correct power requirements).

•

Insert batteries before first use, matching the polarity in the

battery compartment

•

Remove protective plastic screen from LCD display (if any)

IMPORTANT NOTE: The Atomic Projection Clock does not work

without the batteries.

BATTERY INSTALLATION

•

Open the battery compartment doors

•

Install 2 batteries (UM-3 or “AA” size 1.5V) matching the polarity

as shown in the battery compartments

•

Replace the battery compartment doors

WWVB RADIO CONTROLLED TIME

The NIST (National Institute of Standards and Technology) radio station

(WWVB) is located in Ft. Collins, Colorado. It transmits an exact time

signal continuously throughout the most of the continental United States

at 60 KHz frequency. The Atomic Projection Clock can receive this

WWVB signal through the internal antenna from up to 2,000 miles away.

Due to the nature of the Earth’s ionosphere, reception can be limited

during the daylight hours. The radio controlled clock will search for an

alternate station that receives the atomic time signal from the NIST

Atomic clock in Boulder, Colorado.

The WWVB tower icon on the unit’s display will flash indicating a radio

signal reception from the WWVB station. If the tower icon is not fully lit, or

if the time and date are not set automatically, please consider the

following:

•

During night-time hours, atmospheric disturbances are typically

less severe and radio signal reception may improve. A single

daily reception is sufficient enough to keep the clock accuracy

within 1 second.

• Make sure the unit is positioned at 8 feet (2 meters) distance

from any interference source such as a TV, computer monitor,

microwave, etc.

• Within concrete wall rooms such as basements or office buildings,

the received signal may be weakened. Always place the Atomic

Projection Clock near the window for better reception.

ATOMIC CLOCK

Immediately after installation of batteries, the clock will beep and display

all available LCD segments for a moment. Then the atomic time signal

receiver will start searching for the atomic time signal. It usually takes

between 5-8 minutes.

NOTE:

Do not press any buttons on the unit during auto search as it

may interrupt product’s operation, and you will need to start the set

up procedure again

If the reception is successful and the atomic time signal is received, the

date and time will be set automatically, and the [ ] icon will appear on the

display.

NOTE: It is necessary to set your Time Zone, keeping in mind that

the default zone is a Pacific Standard Time (PST). (Refer to MANUAL

SETTINGS section)

If the initial reception was not successful and the time signal has not been

received in this first 8 minutes, you may press and hold the UP (+) and

DOWN (-) buttons simultaneously to enforce a signal search Or, you can

use the MODE button to set the time and date manually. (Refer to the

MANUAL SETTINGS section).

After the clock is set manually, place it by the window for the better

reception. The atomic time receiver is programmed so that it will continue

to search for the atomic time signal daily for every hour between 1:00 am

and 4:30 am.

NOTE: At the time of the initial reception allow at least 24 hours for

the atomic time receiver to pick up the signal. In some cases,

depending on the location, it may take up to 72 hours.

Once the time signal has been successfully received, the time and the

date will be updated automatically.

TEMPERATURE AND ALARM WINDOW

The Temperature and Alarm Window displays an indoor temperature

and the time alarms.

TIME AND CALENDAR WINDOWS

The Atomic Projection Clock displays time in an hour-minutes-seconds

format in the Time Window located below the Temperature and Alarm

Window.

The date is displayed in month-date format next to the day of the week

and moon phase icon in the Calendar Window.

MANUAL SETTINGS

If desired, the time, date and other available parameters can be

programmed manually.

It is necessary to set your Time Zone manually.

TIME ZONE

• Enter the US Time Zone programming mode by pressing and

holding the UP (+) button for 3 seconds.

• Keep holding UP (+) button until the desired time zone (Pacific,

Mountain, Central or Eastern) is highlighted on the unit’s display

map in the Time Window

• Release the UP (+) button and the desired Time Zone will be

selected

CLOCK

• Press and hold MODE button for 3 seconds until the year digits

in the Calendar Window will flash

• Press UP (+) or DOWN (-) adjusting to correct year

• Press MODE to confirm and move to the next parameter – the

month digit will flash

•

Press UP (+) or DOWN (-) adjusting the current month and then

press MODE to confirm – the date digit will flash

•

Press UP (+) or DOWN (-) adjusting the date and then press

MODE to confirm – the hour digit will flash in the Time Window

•

Press UP (+) or DOWN (-) adjusting the hour and then press

MODE to confirm – the minutes will flash

•

Press UP (+) or DOWN (-) adjusting the minutes and then press

MODE to confirm – the temperature unit (C or F) in the

Temperature and Alarm Window will flash

•

Press UP (+) or DOWN (-) button once selecting the temperature

unit in Fahrenheit or Celsius

•

Press MODE for the last time to confirm after the last parameter

is set

DAY OF THE WEEK LANGUAGE

• Press and hold DOWN (-) button for 3 seconds to enter into the

day of the week language programming mode: the default

language abbreviation will appear (example – EN)

• Continue holding DOWN (-) button until the desired day of the

week language abbreviation is displayed

• Release the DOWN (-) button and the day of the week will be

displayed in selected language

ALARMS

The Atomic Projection Clock has two time alarms. If any of the alarms is

activated, it will sound at the set time and the alarm icon will flash

PROGRAMMING THE TIMES OF THE ALARMS

• Press MODE button to view the ALARM 1 or ALARM 2 modes.

If the ALARM 1 is selected, the default time “6:00” with the

ALARM 1 label will be displayed. If the ALARM 2 is selected, the

default time”8:00”with the ALARM 1 label will be displayed

• Press and hold button for three seconds - the hour digit

will flash

• Enter the hour using DOWN (-) or UP (+) buttons

• Press button once - the minute digits will flash

• Enter minutes using DOWN (-) or UP (+) buttons

• Press button once again. The minute digits for snooze

interval will flash

• Enter the desired interval in minutes (from 1 to 59) using DOWN

(-) or UP (+) buttons

• Press button once confirming the ALARM 1 time is set.

• Use the same procedure for setting the time for ALARM 2

ACTIVATING OR DEACTIVATING THE ALARMS

• At any time press

to activate or deactivate

applicable alarm

• When ALARM 1 and ALARM 2 are disabled, an applicable icon

or disappears from the unit’s display.

SNOOZE

When any alarm sounds, press the SNOOZE/LIGHT button to temporarily

stop the alarm. After the SNOOZE/LIGHT button are depressed, the

alarm sound will resume in the programmed snooze period.

If the alarm is not disabled after that, it will sound for four more minutes

and then will stop by itself.

PROJECTION

The Atomic Projection Clock is capable of projecting the information for a

limited time, as well as continuously.For projection of the image on the

wall or ceiling, rotate the rear body swivel compartment clockwise or

counterclockwise.

LIMITED TIME PROJECTION

• Press SNOOZE/LIGHT button once to project the current time

image in red color for three seconds.

• Press FLIP button to rotate projected image 180° clockwise

•

Press and hold FLIP button for 2 seconds again and the

projected image will rotate between the time and indoor

temperature information every 5 seconds

CONTINUOUS TIME AND TEMPERATURE PROJECTION

Connect AC/DC adapter provided to the adapter input to project the time

and/or temperature image continuously.

BACKLIGHT

the backlight feature is activated in blue color for 3 seconds when the

LIGHT/SNOOZE button is pressed.

PRECAUTIONS

This product is engineered to give you years of satisfactory service if

handled carefully. Here are a few precautions:

•

Do not immerse the unit in water.

•

Do not clean the unit with abrasive or corrosive materials. They

may scratch the plastic parts and corrode the electronic circuits.

• Do not subject the product to excessive force, shock, dust,

temperature, or humidity, which may result in malfunctions,

shorter lifespan, damaged batteries, and damaged parts.

• Do not tamper with the unit’s internal components. Doing so will

invalidate the warranty and may cause damage. The unit

contains no user-serviceable parts.

• Use only fresh batteries. Do not mix new and old batteries.

• Read the user's manual thoroughly before operating the unit.

TROUBLESHOOTING

Check here before contacting customer service.

Issue Symptom Solution

Clock US Atomic Time

signal is not

received

Place unit by the window and

keep it there at least

overnight

Blank display Check/insert batteries Clock

Does not project

continuously

Connect the clock to the wall

power outlet using AC/DC

adapter provided

SPECIFICATIONS

Time

Date format: month – day

User-selectable US Time Zone

Day of the week: User-selectable in three languages-English, Spanish or

French

Dual 4 minutes crescendo alarm with programmable snooze

Moon phase

Weather

Indoor Temperature

Proposed operating range: -5.0°C to +50.0°C/23.0°F to 122.0°F

Temperature resolution: 0.1°C/0.1°F

User-selectable (F° or C°) temperature display

LED backlight: 3 seconds on battery power

Low battery indicator

Projection

Focus adjustment

180° projected image rotation and flip

Projection color: Red

Backlight color: Blue

Power

AC/DC adapter - 3V, 120mA (included)

Dimensions

4.02(L) x 4.02(H) x 2.44(D) inches

STANDARD WARRANTY INFORMATION

This product is warranted from manufact uring defects for one year from the date of retail

purchase. It does not cover damages or wear resulting from accident, misuse, abuse,

commercial use, orunauthorized adjustment and repair.

Note that online product registration is required to ensure valid warranty protection.

To register your product, go to our Company website at:

http://www.hidekielectronics.us/Support.html.Click Register a New Product.

Should you require assistance with this product and its operation, please contact our

Customer Service 1(866) 443 3543.

Please direct all returns to the place of the original purchase. Should this not be possible,

contact Hideki Customer Service for assistance and to obtain a Return Merchandise

Authorization (RMA). Returns without a return authorization will be refused. Please retai n

your original receipt as you may be asked to provide a copy for proof of purchase.

Hideki Electronics, Inc. reserves the right to repair or replace the product at our option.

is used under license from Honeywell International Inc.

Honeywell International Inc.makes no representations or warranties with respect to this

product.

All user manual contents and information are subject to change.

INTRODUCTION 3

PRODUCT OVERVIEW 3

BEFORE YOU BEGIN 6

BATTERY INSTALLATION 7

ATOMIC CLOCK 8

TEMPERATURE AND ALARM WINDOW 9

TIME AND CALENDAR WINDOWS 9

MANUAL SETTINGS 9

ALARMS 10

SNOOZE 11

PROJECTION 11

BACKLIGHT 12

PRECAUTIONS 12

TROUBLESHOOTING 13

SPECIFICATIONS 13

STANDARD WARRANTY INFORMATION 14

Honeywell 1

Summary of Contents

Page 1 - Honeywell

Honeywell (PCR191W) J K L M K 3&5:+21(<:(//0$18$/(1*6,=(:;+00%<;++8$1*Atomic Projection Clock USER MANUALTA

Comments to this Manuals

No comments

Honeywell PCR191W User Manual

Browse online or download User Manual for Alarm clocks Honeywell PCR191W. Honeywell PCR191W User's Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Alarm clocks Honeywell PCR191W