Honeywell CT1800 User Manual

Browse online or download User Manual for Control panel Honeywell CT1800. Honeywell CT1800 User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
1 69-0394—3
D.F. • Rev. 11-96 • Printed in U.S.A. • • ©Honeywell Inc. 1996 • Form Number 69-0394—3
Installation Instructions
CT1800 24V gas or oil heat, or 3 wire zone valves.
CT1801 24V gas or oil heat/cool.
CT1802 24V central electric heat/cool or single stage
heat pump without auxiliary heat.
Not for use on line voltage (120V) millivolt systems
.
CT1800, CT1801, CT1802
Electromechanical Fuel Saver Thermostat and Wallplate/Subbase
Recycling Notice
This control contains mercury in a sealed tube. Do
not
place control in the trash at the end of its useful life.
If this control is replacing a control that contains mercury in
a sealed tube, do
not
place your old control in the trash.
M3375
THERMOSTAT FEATURES
M3375
I—Front of thermostat.
M9613
HIGH TEMPERATURE
CONTROL LEVER
(RED)
LOW TEMPERATURE
CONTROL LEVER (BLUE)
THERMOSTAT COVER
THERMOMETER
THERMOSTAT
BASE
24 HOUR PROGRAM DIAL
(GRAY AREA FOR
NIGHT SETTINGS)
AAA ALKALINE
BATTERY (2) INCLUDED
LOW TEMPERATURE
CONTROL LEVER
(BLUE)
HIGH
TEMPERATURE
CONTROL LEVER
(RED)
SWITCH
BULBS
CAPTIVE
MOUNTING
SCREW
CAPTIVE
MOUNTING
SCREW
WALLPLATE (BEHIND
THERMOSTAT. HELD
ON BY TWO CAPTIVE
SCREWS.)
ADJUSTABLE HEAT
ANTICIPATOR
PROGRAM
INDEX WHEEL
TIME INDICATOR
ARROW
HEAT
ANTICIPATOR
SETTING
LEVER
M9615
III—Cover removed.II—Hinged cover lifted.
24 HOUR PROGRAM DIAL
(GRAY AREA FOR NIGHT
SETTING)
TIME
INDICATOR
ARROW
PROGRAM
PIN
STORAGE
THERMOSTAT COVER
PROGRAM
INDEX WHEEL
PROGRAM
PIN SLOT
PROGRAM PINS FLIP-UP
COVER
M9614
Contact your local waste management authority for
instructions regarding recycling and the proper disposal of
this control, or of an old control containing mercury in a
sealed tube.
Page view 0
1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - CT1800, CT1801, CT1802

1 69-0394—3D.F. • Rev. 11-96 • Printed in U.S.A. • • ©Honeywell Inc. 1996 • Form Number 69-0394—3Installation InstructionsCT1800

Page 2 - 3 REMOVE OLD THERMOSTAT

69-0394—3 2TABLE 1—THERMOSTAT AND SUBBASE APPLICATIONS.a1 PREPARATIONCheck thermostat and wallplate suitability for your heating or heating/cooling s

Page 3 - 4 MOUNT WALLPLATE OR SUBBASE

3 69-0394—3M6115BULBSWITCHANTICIPATORSCALEANTICIPATORSETTING LEVERDisconnect wires from old thermostat, wallplate orsubbase. Tape each end and label w

Page 4 - 5 WIRE WALLPLATE OR SUBBASE

69-0394—3 43 SCREW HOLES WITH PLASTICANCHORSHEATING-ONLYWALLPLATEM9612AUTO OFFCOOLHEATONFANBOWYRGM2419SPIRIT LEVEL5 WIRE WALLPLATE OR SUBBASENOTE: Al

Page 5 - SINGLE STAGE HEAT PUMP

5 69-0394—3AUTO OFFCOOLHEATONFANWYGM2413HEATINGRELAY ORVALVE COILCOOLINGCONTACTORCOILFANRELAYL1(HOT)L2POWER SUPPLY. PROVIDE DISCONNECT MEANS ANDOVERL

Page 6 - 7 SET HEAT ANTICIPATOR LEVER

69-0394—3 66 MOUNT THE THERMOSTATNote the tabs on the top inside edge of the thermostatbase. These fit the slots molded into the top of thewallplate

Page 7 - 10 ATTACH THERMOSTAT COVER

7 69-0394—38 INSTALL CLOCK BATTERIESPower is supplied to the clock by two AAA alkalinebatteries (included). Install clock batteries inthermostat as s

Page 8

69-0394—3 869-0846 4Helping You Control Your WorldPush both temperature control levers together atleast 5°F (3°C) above room temperature. The heatshou

Related models: CT1802

Comments to this Manuals

No comments