Honeywell rth230b User Manual download pdf (Page 4)

RTH230B 69-1800 2/6/05 4/4

5.2 Energy-saving Schedule

Your thermostat is preprogrammed with an energy-saving schedule.

The schedule automatically controls your heating or cooling system

by switching from one setpoint to the next according to the preset

times.

Note: To use the schedule, place the thermostat in programmable

mode.

5.3 Modifying the Schedule

You can program up to 4 periods per day, each period having its

own temperature settings. The same program is repeated daily from

Monday through Friday and another program is used for Saturday

and Sunday. For each period, you can set the start time, the heating

setpoint and the cooling setpoint.

n Press [ Pgm ]. The settings for period 1 are displayed.

Note: During programming, to skip a period, press [ CLR ] while

the period is displayed. For example, in the predefined energy-sav-

ing schedule, periods 2 and 3 have been skipped for Saturday and

Sunday.

o Select the program using the [ Day ] button (MO TU WE TH FR

appears when the Monday-Friday program is selected or SA

SU appears when the Saturday/Sunday program is selected).

Press for 3 seconds to select all 7 days.

p Set the time (in increments of 15 minutes) using the but-

tons.

q Press [ P# ]. The heating or cooling setpoint

flashes depending on the position of the Heat/

Cool selector.

r Set the desired temperature for the displayed

period using the buttons.

s Use the Heat/Cool selector to switch to the other mode (e.g., if

you were in Heating mode, switch to Cooling mode). The set-

point for that mode flashes.

t Set the desired temperature using the buttons.

u Press [ P# ] to go to the next period.

v Repeat steps 2 to 8 for each of the remaining periods.

w Press [ Exit ] to exit.

Note: To use the schedule, place the thermostat in programmable

mode.

Power supply: 2 AA batteries

Maximum load: 1 A @ 24 Vca per output

Setpoint range (heating): 41 to 82°F (5 to 28°C)

Setpoint range (cooling): 59 to 95°F (15 to 35°C)

Display range: 23 to 122°F (-5 to 50°C)

Storage temperature: -2 to 122°F (-20 to 50°C)

Temperature display resolution: 1°F (0.5°C)

Accuracy: ± 1°F (0.5°C)

Heating/cooling cycle lengths: 10, 12, 15, 20 or 30 minutes (programmable)

Compressor short-cycle protection (minimum off time): 5 minutes

Data memory: non-volatile

Dimensions: 5 in. x 3 in. x 1 in. (127 mm x 75 mm x 28 mm)

Honeywell warrants this product, excluding battery, to be free from defects in

the workmanship or materials, under normal use and service, for a period of

one (1) year from the date of purchase by the consumer. If at any time dur-

ing the warranty period the product is determined to be defective or malfunc-

tions, Honeywell shall repair or replace it (at Honeywell's option).

If the product is defective,

(i) return it, with a bill of sale or other dated proof of purchase, to the place

from which you purchased it, or

(ii) call Honeywell Customer Care at 1-800-468-1502. Customer Care will

make the determination whether the product should be returned to the

following address: Honeywell Return Goods, Dock 4 MN10-3860,

1885 Douglas Dr N, Golden Valley, MN 55422, or whether a replace-

ment product can be sent to you.

This warranty does not cover removal or reinstallation costs. This warranty

shall not apply if it is shown by Honeywell that the defect or malfunction was

caused by damage which occurred while the product was in the possession

of a consumer.

Honeywell's sole responsibility shall be to repair or replace the product

within the terms stated above. HONEYWELL SHALL NOT BE LIABLE FOR

ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL

OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDI-

RECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR

IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some states do

not allow the exclusion or limitation of incidental or consequential damages,

so this limitation may not apply to you.

THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL

MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WAR-

RANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE

ONE-YEAR DURATION OF THIS WARRANTY. Some states do not allow

limitations on how long an implied warranty lasts, so the above limitation

may not apply to you.

This warranty gives you specific legal rights, and you may have other rights

which vary from state to state.

If you have any questions concerning this warranty, please write Honeywell

Customer Relations, 1985 Douglas Dr, Golden Valley, MN 55422 or call 1-

800-468-1502. In Canada, write Retail Products ON15-02H, Honeywell Lim-

ited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V4Z9.

If you have any questions about the operation of your thermostat, please go

to www.honeywell.com/yourhome, or call Honeywell Customer Care toll-

free at 1-800-468-1502.

Default schedule settings

Monday

to Friday

Saturday

& Sunday

Heating 70°F (21°C)

6:00 a.m. 6:00 a.m.

Cooling 78°F (25.5°C)

Heating 62°F (16.5°C)

8:00 a.m. --

Cooling 85°F (29.5°C)

Heating 70°F (21°C)

6:00 p.m. --

Cooling 78°F (25.5°C)

Heating 62°F (16.5°C)

10:00 p.m. 10:00 p.m.

Cooling 82°F (28°C)

Period start time

Program days

Period number

Temperature

setting

6. Technical Specifications

7. Warranty

8. Customer Assistance

As an ENERGY STAR

partner, Honeywell has determined that this

product meets the E

NERGY STAR guidelines for energy efficiency.

Printed in China

1 2 3 4

Comments to this Manuals

No comments

Honeywell rth230b User Manual Page 4

Comments to this Manuals

Related products and manuals for Control panel Honeywell rth230b