Honeywell F300 User Manual download pdf (Page 13)

F300 ELECTRONIC AIR CLEANER

13 68-0240EF-5

Washing Cells in a Container

CAUTION

Hazardous Chemical.

Can cause personal injury.

Do not splash detergent solution in eyes. Wear rubber

gloves to avoid prolonged detergent contact with skin.

Keep detergent and solution out of reach of children.

NOTE: Always wash the cells first, then the prefilters, to keep

heavy prefilter lint from getting caught in the cells.

1. Use a large enough container, such as a laundry tub or

trash container, to hold one or both cells.

NOTE: Sharp corners on cells can scratch surface of

bathtub.

2. Dissolve about 3/4 cup of automatic dishwasher deter-

gent per cell in enough hot water to cover the cells. If

detergent does not dissolve readily, or forms a scum on

the water, try another brand, or use softened water

3. After detergent has completely dissolved, place cells in

the container and let soak for 15 to 20 minutes. Agitate

up and down a few times and remove. See Fig. 13.

Fig. 13. Washing cells in container.

4. Next, wash the prefilters the same way. Empty and rinse

the wash container.

5. Rinse the cells and prefilters with a hard spray of very

hot water; rinse the tub clean, then fill the tub with clean

hot water and soak for 5 to 15 minutes. Rinse until the

water draining from the cells and prefilters no longer

feels slippery.

6. Soak cells and prefilters in a final clear water rinse for

ten minutes.

7. Wipe ionizer wires and contact board on end of cell using

your thumb and forefinger with a small, damp cloth.

Washing Cells at the Car Wash

Use the hand sprayer at a coin-operated do-it-yourself car

wash to clean the cells. Hold the nozzle at least two feet away

from the unit to avoid damage (such as broken ionizer wires or

bent collector plates) from the high pressure stream of water.

See Fig. 14. Follow the same sequence of wash and rinse as

recommended for cars. However, do not wax the cells. Be sure

to rinse until the water draining from the cells no longer feels

slippery.

Fig. 14. Washing cells at car wash.

Reinstall the Cells and Prefilters

1. Inspect the cells for broken ionizer wires and bent collec-

tor plates. Repair as necessary or take to a

Honeywell Authorized Air Cleaner Repair Station.

2. Slide the prefilters into the upstream prefilter guides.

3. Slide in the air cleaner cells so the airflow arrow points

downstream and the handles faces outward.

4. Firmly close the access door.

5. Turn on the air cleaner. If the cells and prefilters are wet,

the neon light may not come on and you may hear

arcing. If the arcing is annoying, simply turn off the air

cleaner for two to three hours or until the cells are dry.

Replacing Media Postfilters

To maximize the filtration efficiency of the media postfilters,

replace them every six months. Replacement filters are

available in the same size and configuration as the original

unit. Contact your local Honeywell distributor to purchase

replacement filters. Install the replacement filters exactly as the

filters provided with the equipment. Use the Service Reminder

Schedule at the end of this document to help you establish and

maintain a regular replacement schedule. Keep your Service

Reminder Schedule in a convenient location.

M922A

WEAR GLOVES

TO PROTECT

HANDS FROM

DETERGENT

SOLUTION.

HIGH VELOCITY

DETERGENT SPRAY

STEAM

M20831

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Comments to this Manuals

No comments

Honeywell F300 User Manual Page 13

Comments to this Manuals

Related products and manuals for Air filters Honeywell F300