Honeywell Genesis 7580 User's Guide download pdf (Page 9)

Labels

Each MS7580 has a label located near the top of the output window. This label

provides the imager’s model number, date of manufacture, serial number, CE

and caution information. Additional information has been molded into the

underside of the imager's case. The following figure gives an example of the

label and the molded text with their locations identified.

Figure 2. Label and Molded Text Samples

Caution: To maintain compliance with applicable standards, all circuits connected to

the imager must meet the requirements for SELV (Safety Extra Low Voltage)

according to EN/IEC 60950-1.

To maintain compliance with standard CSA C22.2 No. 60950-1/UL 60950-1

and norm EN/IEC 60950-1, the power source should meet applicable

performance requirements for a limited power source.

Maintenance

Smudges and dirt on the imager's window can interfere with the imager's

performance. If the window requires cleaning, use only a mild glass cleaner

containing no ammonia. When cleaning the window, spray the cleaner onto a lint

free, non-abrasive cleaning cloth and then gently wipe the window clean.

If the imager's case requires cleaning, use a mild cleaning agent that does not

contain strong oxidizing chemicals. Strong cleaning agents may discolor or

damage the imager's exterior.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 63 64

No comments

Honeywell Genesis 7580 User's Guide Page 9