Honeywell MS9590 VoyagerGS User's Guide download pdf (Page 21)

Figure 19.

SCANNER OPERATION

Default Modes of Operation

There are two default modes of operation available with the MS9590 series.

1. In-Stand, Automatic Activation Mode

• The laser is activated upon object detection in the IR activation area.

• Bar code data is automatically decoded and transmitted.

2. Out-of-Stand, Manual Activation Mode

• The trigger (CodeGate) activates the laser.

• Bar code data is scanned and transmitted while the trigger is held down.

Scanning with the Manual Activation Mode

1. Aim the scanner at the bar code.

2. Pull and hold down the trigger to

turn on the laser, scan, and transmit

the bar code.

3. The scanner will beep and flash the

white LED once to indicate a

successful scan and transmission.

Maintenance

Smudges and dirt on the unit's window can interfere with the unit's performance.

If the window requires cleaning, use only a mild glass cleaner containing no

ammonia. When cleaning the window, spray the cleaner onto a lint free, non-

abrasive cleaning cloth then gently wipe the window clean.

If the unit's case requires cleaning, use a mild cleaning agent that does not

contain strong oxidizing chemicals. Strong cleaning agents may discolor or

damage the unit's exterior.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 46 47

No comments

Honeywell MS9590 VoyagerGS User's Guide Page 21