Honeywell MS-2 User Manual download pdf (Page 23)

Output Circuits Installation

MS-2/MS-4 PN 51512:E 01/18/05 23

2.4.2 Special Application DC Power Output Connections

Resettable 24 VDC special application power is available on both the MS-2 and MS-4

control panels. Nonresettable 24 VDC special application power is available only on

the MS-4.

2.4.3 Relays

The MS-2 and MS-4 control panels provide an alarm and fail-safe trouble relay and the

MS-4 also provides a supervisory relay. Each Form-C relay is rated for 2 amps @

30VAC (resistive).

Note that relay connections may be power-limited or nonpower-limited, provided that

0.25” minimum spacing is maintained between conductors of power-limited and

nonpower-limited circuits.

TB1

Figure 2.7 Special Application Power

4-Wire Smoke Detector Power (500 mA)

24 VDC filtered, resettable special application power

for 4-wire smoke detectors can be obtained from

these terminals (power-limited)

Nonresettable Power (500 mA) - MS-4 Only

24 VDC filtered, nonresettable special

application power can be obtained from

these terminals (power-limited)

+ - + -

ms-4tb1.cdr

TB5

TB6

TB7

TROUBLE

C TRBL NORM

C NC NO

ALARM

SUPV

C NC NO

Figure 2.8 Relay Terminals

Note: Relay contacts are shown with

power applied to the panel and no active

troubles, alarms or supervisories.

The Trouble Relay is a fail-safe relay

which will transfer on any trouble or

total power failure.

ms4relay.cdr

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 55 56

No comments

Honeywell MS-2 User Manual Page 23