Honeywell CT54 User Manual download pdf (Page 1)

® U.S. Registered Trademark

INSTALLATION INSTRUCTIONS

69-1696EF

CT54 Thermostat

STEP 1. PREPARE FOR

INSTALLATION

The CT54 Thermostat controls 2-wire, 15 Vac to 30 Vac,

gas, oil or electric heating-only systems.

The CT54 Thermostat is not suitable for:

• cooling systems

• heating-cooling systems

• 3-wire electric heating systems

If you are unsure which thermostat model is right for your

system, visit www.honeywell.com/yourhome

or call

Honeywell Customer Care at 1-800-468-1502.

1. Check that the following components are included:

• Thermostat

• Two one-inch screws

• Installation Instructions

2. Required tools:

• Slotted screwdriver

• Drill

• Drill bit (1/16 in.)

• Needle nose pliers

• Level

• Pencil

STEP 2. REMOVE OLD

THERMOSTAT

1. Turn power off to the system at the furnace or at

the fuse/circuit breaker panel.

2. If the cover does not easily pull off, remove any

screws that may fasten the cover to the thermostat.

3. Locate the heat anticipator scale and the heat

anticipator lever on the old thermostat (see Fig. 1).

Fig. 1. Heat anticipator on old thermostat (example).

4. Record the number that the heat

anticipator lever points to on the heat

anticipator scale.

NOTE: If you cannot find the heat anticipator setting on

your thermostat, you can use a standard setting

for your type of system when you reach Step 5.

Set Heat Anticipator On New Thermostat.

5. Remove the screw or screws that hold the thermo-

stat to the wall and pull the thermostat away from

the wall.

6. Remove the two wires from the old thermostat and

wrap them around a pencil to keep them from fall-

ing back into the wall (see Fig. 2). If there are more

than two wires connected to your old thermostat,

do not remove the wires. Visit www.honey-

well.com/yourhome or call 1-800-468-1502 for fur-

ther assistance with the installation.

Fig. 2. Pull wires through wall opening.

M21192

OLD THERMOSTAT HEAT

ANTICIPATOR SCALE

HEAT ANTICIPATOR LEVER

TYPI

L LO

TIO

AND

LEVE

WIRES

THROUG

WALL

OPENING

M1964

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - CT54 Thermostat

Page 2 - MERCURY NOTICE

CT54 THERMOSTAT69-1696EF 2MERCURY NOTICEIf this thermostat is replacing a control that contains mercury in a sealed tube, do not place the old thermos

Page 3 - IF YOU HAVE A PROBLEM

CT54 THERMOSTAT3 69-1696EFSTEP 5. SET HEAT ANTICIPATOR ON NEW THERMOSTAT1. Set the heat anticipator lever to the number that you recorded in Step 2. R

Page 4 - Printed in U.S.A. on recycled

69-1696EF J.S. 9-03 www.honeywell.com/yourhomePrinted in U.S.A. on recycled paper containing at least 10% post-consumer paper fibers.Automation an

Page 5 - Thermostat CT54

Page 6 - AVIS DE RECYCLAGE

THERMOSTAT CT5469-1696EF 2Fig. 2. Faire passer les fils par l’ouverture dans le mur.AVIS DE RECYCLAGESi le nouveau thermostat remplace un ancien régul

Page 7 - Services à la clientèle

THERMOSTAT CT543 69-1696EFÉTAPE 5. RÉGLAGE DE LA RÉSISTANCE ANTICIPATRICE DE CHALEUR DU NOUVEAU THERMOSTAT1. Régler le doigt de réglage de la résistan

Page 8

Imprimé aux États-Unis sur du papier recyclé contenant au moins 10 % de fibres post-consommation.69-1696EF J.S. 9-03 www.honeywell.comSolutions d

Comments to this Manuals

No comments

Honeywell CT54 User Manual Page 1

Browse online or download User Manual for Control panel Honeywell CT54. Honeywell CT54 Manuel d'utilisation

Summary of Contents

Comments to this Manuals

Honeywell CT54 User Manual Page 1

Browse online or download User Manual for Control panel Honeywell CT54. Honeywell CT54 Manuel d'utilisation

Summary of Contents

Comments to this Manuals

Related products and manuals for Control panel Honeywell CT54