Honeywell EC-P2 User Manual download pdf (Page 18)

Honeywell EC-P2 Instruction and Installation Manual

Push the MORE button.3.

Push the SMPL (sample) button and the unit is now in the SAMP / MEAS 4.

/ CLEAR mode.

SAMP Variable

Push SAMP (sample) button.5.

Push INC button (increase) or DEC button (decrease) until the display 6.

matches the desired value. The display is in minutes and seconds.

Push SAVE button to store new SAMP variable.7.

To Exit SAMP / MEAS / CLEAR Mode

Push DONE button twice slowly to get back into normal operation mode.8.

The Measure and Clear variables are programmed in the same manner, except for

step ﬁve above in which you would push the MEAS or CLEAR button.

4.4 Data Logging

The Honeywell EC-P2 can log periodic gas concentration readings to be downloaded

to a ﬁle which can be read by Microsoft Excel or other popular spreadsheet

applications. The EC-P2 will store instantaneous gas values every one, ﬁve, 10, or 15

minutes. Multiple sessions can be logged and then downloaded as separate ﬁles.

EC-P2 software installation:

The Honeywell EC-P2 is supplied with a CD containing the “Honeywell EC-P2”

program. It will run on Windows 98, Windows 2000 or Windows XP. To install the

program, place the disk in your CD drive. The CD should automatically begin the

installation process. Follow the prompts as they appear on your screen. Accepting

the default directory locations is recommended for most installations. If the CD does

not automatically start, click on “My Computer” and then your CD drive. Double-click

on the ﬁle named “Setup.exe.”

Prior to your ﬁrst datalogging session it is recommended that you connect the

Honeywell EC-P2 to your computer with the data logging program running. The

computer can then set the time in the EC-P2 to match its own clock.

Data Logging with the Honeywell EC-P2:

To Start the Data Logging Session

Push power button to turn unit on. Wait for power up sequence to ﬁnish 1.

(30 seconds).

Push the MENU button.2.

Push the LOG button and the unit is now in the CLEAR / INT / START 3.

mode.

If the CLEAR button is available, that means there is data currently stored 4.

in the unit. If desired, you can erase the data already in the unit by pushing

the CLEAR button. (If you don’t push CLEAR, each data logging session

can be downloaded as a separate ﬁle).

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

No comments

Honeywell EC-P2 User Manual Page 18