Honeywell W8735B User Manual download pdf (Page 6)

TELEPHONE ACCESS MODULE

69-1352 6

Fig. 9. Telephone installation wiring including

monitored security system.

Installing W8735B Module Housing Onto

Subbase

After subbase is mounted and wiring complete, install the

module housing onto the subbase:

Align the subbase and the module housing and

press together; see Fig. 10.

Insert the 2 ¾ in. screws (provided) into the holes.

Tighten screws; be careful not to over tighten.

Connect and insert 9 Vdc alkaline battery.

NOTE: 9 Vdc alkaline battery is optional; however,

when the battery is installed in the W8735B, the

power outage alert option is available.

Replace the cover. See Fig. 11.

Insert the module cover latch pin; see Fig 12.

Apply power to the system.

IMPORTANT

The Telephone Access Module does not answer

within the first 90 seconds after applying power

or anytime power is disconnected.

Do not attempt to dial in to the Telephone Access

Module for the first 90 seconds after applying

power to allow the Telephone Access Module time

to generate its user menu.

Fig. 10. Installing module onto subbase.

M14805

PHONE

OUT

LINE

TO HOUSE

TELEPHONES

USE EITHER RJ11 TELEPHONE CONNECTORS OR OPTIONAL

TELEPHONE CONNECTIONS.

TO TELEPHONE LINE

SECURITY

SYSTEM

TELEPHONE

OUT

Ln 1

Ln 2

Ph 1

Ph 2

SUBBASE

SECURITY SYSTEM

PANEL

MODULE

NOT

USED

M14769

SUBBASE

MODULE

2-3/4 IN. (70)

SCREW (2)

BATTERY

CONNECTOR

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Honeywell W8735B User Manual Page 6

Comments to this Manuals