Honeywell Switch MAXPRO-NET User Manual download pdf (Page 18)

2.4 CONTROLLING A CAMERA PTZ

To operate a camera PTZ site, the following must first be true.

• you must currently be selecting a monitor,

• the monitor must be displaying the desired camera,

• the desired camera must have PTZ equipment fitted.

Camera pan, tilt, focus, and zoom control functions are detailed below. They are the

same on both the RD-500 and RD-530 keyboards.

PAN LEFT .. by pushing (and holding) the joystick towards the

Left. Releasing the joystick will halt the pan function.

PAN RIGHT .. by pushing (and holding) the joystick towards the

Right. Releasing the joystick will halt the pan function.

TILT UP .. by pushing (and holding) the joystick towards the Up

mark. Releasing the joystick will halt the tilt function.

TILT DOWN .. by pushing (and holding) the joystick towards the

Down mark. Releasing the joystick will halt the tilt function.

NOTE: The Tilt Up and Down functions, may be reversed,

depending on your system's configuration.

If the MANUAL-IRIS or WASH/WIPE options are fitted to the camera PTZ site, then the

following PTZ functions can also be used:

Rev. A 2-4 HMXMU001056

03/16/05

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 79 80

No comments

Honeywell Switch MAXPRO-NET User Manual Page 18