Honeywell Switch MAXPRO-NET User Manual download pdf (Page 33)

3.6.1 Overwrite With A New Camera Selection, Continued

Simply use the or keys to move to the second entry position, and press the

following keys:

• selects camera number 25 as the second entry

in scan sequence 20.

Camera number 12 is now overwritten by the camera number 25.

Entry position in Scan Sequence 1 2 3 4 5

Camera No. 2 25 29 14 17

Table 3.3: Entry Positions In Scan Sequence 20 After Overwriting.

3.6.2 Delete This Camera Selection

Pressing the key will remove this camera selection entry from the scan sequence

list. All following entries will move down one to fill the gap.

If camera number 29 is to be removed from scan sequence 20, use the

keys to move to the third entry position and press the

key.

Entry position in Scan Sequence 1 2 3 4 5

Camera No. 2 25 29 14 17

Current entry position selected

Table 3.4: Entry Positions In Scan Sequence 20 Before Deletion.

Camera numbers fourteen (14) and seventeen (17) at entry positions three (3) and four

(4) respectively, moves down one entry position to fill the gap.

Entry position in Scan Sequence 1 2 3 4

Camera No. 2 25 14 17

Table 3.5: Entry Positions In Scan Sequence 20 After Deletion.

Rev. A 3-9 HMXMU001056

03/16/05

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 79 80

No comments

Honeywell Switch MAXPRO-NET User Manual Page 33