Honeywell DOLPHIN 99EX User Manual Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 190
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
2 - 1
2
Getting Started
Out of the Box
Verify that the carton contains the following items:
Dolphin 99EX mobile computer (the terminal)
Main battery pack (i.e., standard 3.7V Li-poly or extended 3.7V Li-ion)
Quick Start Guide
Note: If you ordered accessories for your terminals, verify that they are also included with the order.
Be sure to keep the original packaging in the event that the Dolphin terminal should need to be returned
for service. For details, see Product Service and Repair on page 18-1.
Step 1. Install the Main Battery Pack
The 99EX is shipped with the battery packaged separate from the unit. Follow the steps below to install
the main battery. For information on how to remove the battery, see Replacing the Main Battery Pack on
page 2-3.
1. Release the hook securing the hand strap to the
back panel of the terminal near the speaker.
2. Remove the battery door by lifting up the latches
near the base of the battery door.
3. Insert the battery into the battery well.
4. Replace the battery door. Apply pressure to
engage the door latch.
Note: The battery door must be installed prior to
powering the unit.
5. Reattach the hand strap.
We recommend use of Honeywell Li-poly or Li-Ion battery packs. Use of any non-Honeywell battery may result
in damage not covered by the warranty.
Step 2. Charge the Main and Backup Batteries
The power supply for Dolphin terminals consists of two types of battery power: the main battery pack
that is accessible from the back panel, and the backup battery that resides inside the terminal.
The main battery powers the terminal. The internal backup battery charges off the main battery and
maintains the application data stored in RAM memory for up to 30 minutes when the terminal’s main bat-
tery pack is completely discharged or removed.
Battery Error Notification
If your terminal displays the following indicators, replace the main battery pack with a Honeywell Li-poly
or Li-ion battery pack. For information on how to remove the main battery pack from the terminal, see
Replacing the Main Battery Pack on page 2-3.
appears in the Title bar at the top of the touch screen
The General Notification LED flashes red
A Notification appears on the Tile bar at the bottom of the touch screen
2.
3.
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 189 190

Comments to this Manuals

No comments