Honeywell DOLPHIN 99EX User Manual download pdf (Page 42)

3 - 16

LowState=10%

This sets the Critical Battery point to 10%. When the battery hits the percentage charge

specified here, the user is notified.

Note: Warnings do not appear when the terminal is on external power.

Setting Critical and Low Battery Points

Developers can reset the battery parameters in the registry from 0 (no warning) to 99 (would nearly

always warn). You can review and set these battery points in the RegEdit Power Tool.

1. Tap > Power Tools > RegEdit.

2. Drill down to HKEY_LOCAL_MACHINE > ControlPanel > Power.

3. Tap the Value Name to change the Value Data.

You can reset the Value Data from 0 (no warning) to 99 (would nearly always warn).

4. Tap OK to save changes.

For more information about the RegEdit Power Tool, refer to the Dolphin Power Tools User’s Guide avail-

able for download at www.honeywellaidc.com.

Checking Battery Power

1. Tap > Settings > System

2. Tap Power to view the power status of the main battery and backup battery.

Note: The Backup Battery gauge registers either 0% or 100%. The percentage is not an indication of the level

of charge remaining on the backup battery. An installed and functional battery registers 100%. A total

discharge or a battery error registers 0%.

Tap Battery to view detailed information on the installed battery pack.

For additonal information on Power, see page 7-16.

For additional information on Advanced Power Settings, see page 7-16.

For additional information on the Battery Log Configuration, see page 7-10.

System Resets

See Resetting the Terminal on page 2-10.

Hardware Maintenance

When needed, clean the image engine window and the LCD display with a clean, non-abrasive, lint-free

cloth. The terminal can be cleaned with a damp cloth. For additional information on hardware mainte-

nance specific to the Dolphin Healthcare Housings, see page 3-12.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 189 190

No comments

Honeywell DOLPHIN 99EX User Manual Page 42