Honeywell Scanner 1900 User Manual download pdf (Page 275)

13 - 1

Maintenance

Repairs

Repairs and/or upgrades are not to be performed on this product. These ser-

vices are to be performed only by an authorized service center (see Customer

Support on page 14-1).

Maintenance

Your device provides reliable and efficient operation with a minimum of care.

Although specific maintenance is not required, the following periodic checks

ensure dependable operation:

Cleaning the Device

Reading performance may degrade if the scanner’s window is not clean. If

the window is visibly dirty, or if the scanner isn’t operating well, clean the

window with a soft cloth or lens tissue dampened with water (or a mild

detergent- water solution). If a detergent solution is used, rinse with a

clean lens tissue dampened with water only.

The scanner and base’s housing may also be cleaned the same way.

Inspecting Cords and Connectors

Inspect the interface cable and connector for wear or other signs of dam-

age. A badly worn cable or damaged connector may interfere with scanner

operation. Contact your distributor for information about cable replace-

ment. Cable replacement instructions are on page 13-1.

Replacing Cables in Corded Scanners

The standard interface cable is attached to the scanner with an 10-pin modular

connector. When properly seated, the connector is held in the scanner’s handle

by a flexible retention tab. The interface cable is designed to be field replace-

able.

Do not submerge the scanner in water. The scanner’s

housing is not watertight.

Do not use abrasive wipes or tissues on the scanner’s

window – abrasive wipes may scratch the window. Never

use solvents (e.g., alcohol or acetone) on the housing or

window – solvents may damage the finish or the window.

Caution:

1 2 ... 270 271 272 273 274 275 276 277 278 279 280 ... 297 298

No comments

Honeywell Scanner 1900 User Manual Page 275