Honeywell SC1000 User Manual download pdf (Page 107)

SC Series Instruction Manual page 107

High-Level Input Channel12

12.4 Calibration Procedure

If you are not familiar with operating the instrument in the SETUP menu mode,

see “SETUP Menu mode” on page 23. A listing of all menu items is given in

“Setup Menu Reference” on page 157.

Step 1: Wire the transducer to the channel’s connector.

See “Wiring” on page 98 for details.

Step 2: Set the Excitation and Signal jumpers appropriate for the transducer,

amplifier or DC-DC LVDT.

See “Wiring” on page 98 and “Excitation and Signal Jumpers” on page 106.

Step 3: Enter the

CALIBRATION TYPE

There are two methods that can be used to calibrate the transducer to the

Input Channel. Each has advantages and disadvantages as described in

“

CALIBRATION TYPE

Menu Item” on page 113. It is important to know your

application in order to select the appropriate calibration type.

Step 4: Enter the

CALIBRATION DATA.

Otherwise, consult the Certificate of Calibration for the transducer when

entering information in the

CALIBRATION DATA

sub-menu.

Step 5: Perform the calibration.

Using the

CALIBRATE

menu item starts the calibration process. You will be

prompted to apply loads to the transducer as required.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 173 174

No comments

Honeywell SC1000 User Manual Page 107