Honeywell SC1000 User Manual download pdf (Page 23)

SC Series Instruction Manual page 23

Operating Modes3

3.5 SETUP Menu mode

The SETUP Menu mode is used to display or change the settings that control the

operation of the instrument.

3.5.1 Available Menus

Each major function of the instrument has its own SETUP Menu. See “Setup Menu

Reference” on page 157.

3.5.2 Entering and

Exiting the SETUP Menu

mode

To enter the SETUP Menu mode, press and hold the [UP] and [DOWN] buttons at the

same time until you see “

SETUP

” on the display. When you release the buttons, you will

see the first SETUP Menu item.

3.5.3 Moving Through

SETUP Menus and Menu

Items

The following table shows how to move though menus and menu items, and how to

display or change the setting of a particular item.

To change the setting of a menu item:

Press [ENTER] to display the current setting, which is preceded by the ‘

’ character.

Press [UP] or [DOWN] until you see the setting you want. To abandon changes, press

[EXIT]. To accept the new setting and move to the next item, press [ENTER].

3.5.4 Exiting the SETUP

Menu mode

To leave SETUP mode and return to the RUN mode, press [EXIT] at any time.

Table 3-1: Navigating the Menus

Button Action

[UP] or [DOWN] Scroll through available menus, sub-menus or menu items.

[ENTER] Select a menu, sub-menu or menu item

[EXIT] If changing a setting: abandons changes to a menu item

otherwise: leaves the SETUP mode.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 173 174

No comments

Honeywell SC1000 User Manual Page 23